Grease as a necessary lubrication products for processing equipment, processing equipment if a long time to work, we can be to follow the grease, but this time the problem comes, grease with the replacement, the remaining how to do, the following I will share with you the problem.

The biggest factor in the preservation of grease is the oxygen and moisture in the air, the additives in the grease will be affected by moisture will lose their effectiveness. Under normal circumstances, the water content in the grease is below 0.03%, when the water content exceeds 0.1%, the additives in the grease will fail.

Oxygen, like moisture, also affects the additives in the grease, especially when exposed to sunlight or high temperatures, where oxygen in the air reacts more quickly with the grease.

It is recommended that after opening the bottle, use plastic wrap to wrap the bottle in a few layers, or use a plastic bag, as long as the seal can be ensured, there are conditions can also be sealed in the bottle cap at the drop of wax, the general grease shelf life is very long, but the premise is that it must be sealed well, placed in a dry and cool place without sunlight.

At the same time, the use of such grease, do not add all, because after a long time storage, impurities and water will be precipitated in the bottom, this time do not add all.

The above is the grease with the replacement, the remaining how to share.