Grease is a lubrication product that many manufacturers will have. Since grease is mainly used in machinery and equipment, many manufacturers will store it in large quantities, as the purchased grease is not likely to be used up in a short time, in order to protect its use, we often choose to save it, the following I will tell you how to save the grease.

1, cans and barrels of grease aspirational storage space is indoor, small barrel packaging and now open any packaging of grease must be stored indoors to prevent the impact of climate change.

2, open air placed 200L oil barrel to lie down, each row of oil barrel ends with wooden wedge fixed, to prevent its tumbling, pay attention to should not be the end of the oil release in the above, water has a negative impact on any grease, it is necessary to often check the oil barrel is not leaking, if the oil barrel is necessary to put straight, should be inverted, so that the barrel mouth down; or the barrel slightly tilted, oil release mouth in the above, to prevent rain piled up on the barrel surface Enter.

3, when the grease is not stored well, the oil into the dust and water, there may be turbidity and deposition, at this time should immediately suspend the use.

4, a lot of storage grease warehouse should also be in line with the principle of early in and early out of the goods.

5, too low or too high temperature may affect the quality of grease, so it is not appropriate to long-term storage of grease in too hot or too cold place.

The above is how to save the grease share.